Fluke 116 True RMS Digital Multimeter

The Fluke 116 combines the benefits of a multimeter with a digital thermometer. This digital multimeter is value priced and is packed with great features for electrical, electronic and temperature troubleshooting problems with HVAC equipment and flame sensors.

It will measure superheat and subcooling, measure key temperatures and pressures. You will be able to detect problems like a clogged filter drier, undercharge, overcharge, faulty metering device or improper airflow, liquid line restriction or insufficient water flow. The 116 will also troubleshoot the defrost control on a heat pump, check the temperature of an air coil, confirm when the defrost cycle starts and ends, take temperature surveys and test out compressor heads, oil sumps, evaporator coils and suction lines, plus discharge lines, condenser coils and the liquid line.

• LoZ - Low impedance input
• Reduces chance of false readings due to ghost voltage with new low impedance design
• Safer troubleshooting in high energy 3-phase distribution panel with IEC 61010 ratings
• Accurate temperature measurement from -40°C to +400°C
• Auto ranging for convenience
• Min/max with relative time stamp
• Capacitance up to 10,000 microfarads
• Microamp functions for testing flame rectification circuits
• Basic functions include volts AC and DC, Ohms, continuity and diode test.
• Basic accuracy 0.9%
• Display counts 6000
• Voltage AC/DC 600
• Current AC/DC 10A
• Resistance 40 Meg
• Temperature -40 to +400 Deg C
• Automatic ranging
• Automatic selection
• Continuity beeper
• Sleep mode
• Display hold