You are using beta.rapidonline.com. For the live site go to rapidonline.com
How cookies can improve your experience
We use cookies on our website to ensure you get the best possible experience – they allow us to tailor content specifically to you, analyse our website to help make improvements, and display ads that are applicable to you across other websites. If you’re happy with this, please select “Allow all", or personalise the cookies you allow with “Manage”. Clicking on “Reject non-essential” will remove these cookies, but the site may not function to its best abilities. For more information, please visit our cookie policy
The Lascar EL-WiFi-Alert is an Audible and Visual Alarm for all EL-WiFi Data Logging Sensors in the EasyLog Wi-Fi range. The EL-WiFi-Alert will receive alarm messages from any EL-WiFi sensor device connected to the same wireless network. The EL-WiFi-Alert indicates an alarm activation using high brightness LEDs and a choice of nine alarm tones. The EL-WiFi-Alert continues to work when the PC is turned off.
The EL-WiFi-Alert has been designed to be continuously powered via the mains and it is supplied with a choice of UK, EU or US power adaptors. However it does contain a rechargeable lithium polymer battery for device positioning and limited power during the event of a mains failure.
The Wi-Fi signal strength indicator is activated by pressing the EL-WiFi-Alert button three times. All LEDs and a fast beep indicate a strong signal. Limited LEDs and slow beep indicate a weak signal.
The audible alarm can be muted by pressing the EL-WiFi-Alert button once or remotely from the PC software. There is also a configurable auto-mute function. the Set-Up is completed through software installed on the PC. This software is available to download for FREE from www.lascarelectronics.com. Free firmware downloads are also available from the same web page.
After the initial set-up, audible and visual alerts can be re-configured wirelessly using the PC software.
The EL-WiFi-Alert can be attached to a wall or flat surface using the bracket provided, and has a protection rating of IP44 (with cable connected). This device is IEEE 802.11b compliant, supports WEP, WPA/WPA2 and WPA-Enterprise (MS-CHAPv2, PEAP, EAP-FAST, EAP-TTLS).
Detects alarms from any EL-WiFi sensor device on the same wireless network
Audible alarm with built-in speaker (SPL 100dBA @1m)
Visual alarm from high brightness LEDs
Continues to work when the PC is turned off
Easy set-up using the free PC software application
Rechargeable internal lithium polymer battery for short term backup during mains failure
Manufacturer's part: Lascar EL-WiFi-Alert
Please Note: Lascar sensors require your wireless network to be IEEE 802.11b compliant. If you have an enterprise network or multiple access points with the same SSID, please contact Rapid to discuss your application before placing your order.